 |
 |
 |
|
INCRA Mast-R-Lift II Router Lift (Imperial or Metric)
The INCRA Mast-R-Lift II Router Lift delivers fast, precise height adjustments from above the table in either inches or metric, and you’ll change router bits from above without special wrenches – no more hoisting a heavy router out of the table!
Like all INCRA Lifts & Router Plates, the exclusive MagnaLOCK system of embedded rare earth magnets with laser cut steel rings gives you convenience and performance not available from twist-out or bolted-down rings: Ring changes are instant and levelers ensure each ring sits perfectly flush with the plate.
This unique design uses 5 sealed ball bearings on the lift screw and cam lock, making it the lowest-friction router lift we've ever used - we've cranked up giant 3hp routers with just one finger! The quarter-turn cam lock is conveniently operated from above and eliminates the router bit’s height drifting from vibration.
Like the bomb-proof previous generations, the new Mast-R-Lift II is still custom-built for us in Canada by JessEm and continues a long history of simplicity and reliability.
Lots of great features in a simple, attractive package!
 Change router bits from above the table
 Make fast, precise height adjustments with positive above-table locking
Height scale is marked every 0.002” or 0.05mm and can be re-zeroed
Exclusive INCRA MagnaLOCK reducing ring system for instant ring changes & perfect ring fit
Includes 5 steel reducing rings - 3/8", 1", 1-5/8", 2-5/8", 3-5/8"
Accepts optional INCRA CleanSweep dust collection rings
Super-responsive, direct drive 16TPI (Imperial) or 2.0mm-pitch (Metric) lift screw mechanism
Low friction, ball bearing-supported lifting & locking mechanism
Patented thread tensioning system eliminates vertical lash
Precision-machined 9-1/4" x 11-3/4" x 3/8" aircraft aluminum top plate is hard-anodized for durability
Corner-mounted cam screw ensures a snug fit in INCRA router tables
Router Table Compatibility: Fits all INCRA Router Tables and some other brands that use a 9-1/4" x 11-3/4" x 3/8" plate size with a 0.750” corner radius. For tables like Kreg and JessEm that have no rabbeted ledge, use the CleanSweep Table Adapter to support the router lift. These versions of the INCRA Mast-R-Lift II are not compatible with Rockler or Bench Dog tables which use a narrower
table opening
.
Motor Compatibility: No adapters needed! The four aluminum clamping blocks have 6 preset positions on the carriage plate to match the diameters of a wide range of fixed-base router motors.
|
Imperial INCRA Mast-R-Lift II:
|
|
Metric INCRA Mast-R-Lift II:
|
Triton Motor TFBR001
Porter Cable 7518, 690-699 series & 890-899 series
JessEm PowRTek SR05300, PowRTek 05200
SpinRite (Woodpeckers)
Milwaukee 5625, 5615, 5616, & 5619
Bora/Portamate P-254, -6000, -6200, & -6250
MLCS 9564
DeWalt DW610 & DW618
Makita RF1101 & RD1101
Hitachi M12VC & KM12VC
Craftsman 17543, 17540, & 28190
Skil RT1322
Ridgid R29302
Rutlands R5018
AUKTools V2, V3 ER 230V
Grizzly T32461
|
|
(Currently NOT compatible with Milwaukee Routers)
Triton Motor TFBR001
Porter Cable 7518, 690-699 series & 890-899 series
JessEm PowRTek SR05300, PowRTek 05200
SpinRite (Woodpeckers)
AEG 1400KE
Felisatti RF62/1500VE
AUKTools V2, V3 ER 230V
DeWalt DW610 & DW618
Makita RF1101 & RD1101
Hitachi M12VC & KM12VC
Bora/Portamate P-254, -6000, -6200, & -6250
MLCS 9564
Craftsman 17543, 17540, & 28190
Ridgid R29302
Rutlands R5018
Grizzly T32461
|
Need a new Milwaukee router?
Note: Milwaukee Routers are NOT compatible with the METRIC Mast-R-Lift II Router Lift. Stay tuned!
Milwaukee makes premium fixed-base routers with innovative features and best-in-class power. Both have been on the market more than 10 years and continue a long history of high-quality Milwaukee power tools.
Electronic-feedback 10,000rpm - 22,000rpm variable speed with 36-position dials
Exceptional durability: Dust-sealed bearings and switches, 8ft heavy-duty cords
Self-releasing precision collets & forged collet wrenches
5-year limited warranties
|
Milwaukee 5625-20 Heavy Duty 3.5hp Router
Milwaukee’s 3.5hp production router is one of our favorites! It’s very smooth for its size and has an accurate collet, excellent variable speed, and great fit and finish. This is a well-proven design, part of a long history of high-quality Milwaukee power tools.
The 5625’s soft-start 120 Volt, 15 Amp motor has plenty of power for turning the largest router bits. It’s been popular for years among demanding CNC router users, and it’s the ideal high-power choice when you're creating a dedicated router table setup.
Includes a self-releasing 1/2" precision collet, nice forged collet wrenches, and an above-table height adjuster. |
| |
|
|
|
|
 |
|
 |
|