MicroJig BladeMatch Arbor Shims – 5/8" Arbor
All your saw blades vary slightly in width,
so changing blades changes the distance from the blade to the fence, making the
fence scale inaccurate, and changes the blade’s alignment with the riving knife
or blade guard.
The solution: BladeMatch Arbor Shims offset
variations in blade thickness, aligning every blade to the same cut line,
keeping you safer and eliminating the need to re-zero the rip fence’s scale
with each blade change. Easy
instructions included!
There’s a bonus use for box joints: Most box joint blade sets cut slightly
undersized from a true 1/4” or 3/8" kerf, and BladeMatch Arbor Shims let
you easily tune the actual kerf width so the spacing of a series of cuts better
matches the board’s width when using the INCRA I-Box or similar box joint jigs.
- Package includes 6 stainless steel shims for 5/8" arbors: 0.003”,
0.004”, 0.005”, 0.006”, 0.010”, and 0.020” in thickness.
- Combine shims to calibrate blade cut line or increase
box joint blade kerf from 0.003” - 0.045” in 0.001” increments.
- Includes easy step-by-step instructions.
