 |
 |
 |
|
Metric INCRA HingeCrafter Drilling Guide
>> Check out "Wooden Hinges with Your INCRA IBox & HingeCrafter" by Guy Dunlap
So you've designed and built the ultimate jewelry box or cabinet, and it is with some apprehension that you approach that final step, installing the hinges. Metal hinges are a pain. Let's face it. It's not so much the hinge itself, it's those darned brass screws. When you finally do get the pilot hole centered properly, the head of the screw is sure to twist right off during installation. It makes you wonder how many brass screw heads are actually glued instead of screwed in the hinge.
What's the solution? Just combine your INCRA Positioner or INCRA I-Box with the HingeCrafter drill guide and the results will be beautiful wooden hinges ready to glue right into your project.
The INCRA HingeCrafter makes for 9.52mm, 12.70mm, 15.88mm & 19.05mm hinges. That's right, you now use the HingeCrafter along with your INCRA Positioners to make four different diameter hinges with our famous incremental accuracy. As you see here, the HingeCrafter easily works with extra-length hinges. Between the four diameters and the many possible lengths with longer drill bits, you have hundreds of options for your next hinge based project.
Imperial or Metric? The HingeCrafter is available in two versions. The
HingeCrafter on this page is compatible only with metric Incra systems and with
the INCRA I-Box, and the inch-based HingeCrafter is available
here.
Even extra long hinge lengths are easy with the INCRA HingeCrafter. Your only limit is twice the useable length of your drill bit. The included bit will make hinges up to 250mm long. Four diameters, dozens of lengths, unlimited choices.
Please note that the Metric HingeCrafter is only compatible with metric INCRA router fence systems.Order the HingeCrafter for 1/32" imperial INCRA systems here.
|
|
|
 |
|
 |
|