|
|
|
|
|
|
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
| |
|
|
|
|
|
|
|
|
TABLE SAW FENCES:
|
|
|
|
|
INCRA SAW/ROUTER COMBOS
Combos are available with either 32"- or 52"- capacity TS Systems
and are available either with or without router tables.
TS-LS Combo #1
32" Range TS-LS Joinery System with
28"x21" Left Side Router Table
TS-LS Combo #2
32" Range TS-LS Joinery System with
28"x32" Right Side Router Table
TS-LS Combo #3
52" Range TS-LS Joinery System with
28"x21" Left Side Router Table
TS-LS Combo #4
52" Range TS-LS Joinery System with
28"x32" Right Side Router Table
|
|
|
|
INCRA TS-LS TABLE SAW FENCE
INCRA TS-LS with Table Saw and Two Optional Router Table Extension Wings.
TS-LS Table Saw Fence - 32" Range
TS-LS Table Saw Fence -
52" Range
|
|
|
|
INCRA TS-LS JOINERY SYSTEM
INCRA TS-LS Joinery System with Table Saw and Two Optional Router Table Extension Wings.
TS-LS Joinery System - 32" Range
TS-LS Joinery System - 52"
Range
|
|
|
|
TS-LS ACCESSORIES
For easy upgrades and all available INCRA Table Saw System Accessories and more.
INCRA Mast-R-Lift II
INCRA QuickLift Router Lift
INCRA PRL-V2 Adaptor Pads
Milwaukee 5625-20 Heavy Duty 3.5hp Router
Milwaukee 1/4" Router Collet Assembly
TS Router Table Tops
Forrest Saw Blades
INCRA MagnaLOCK Ring Sets
INCRA MagnaLOCK Router Plates
TS Routing Accessories
TS Rail Support Legs
Large-Saw Conversions
TS Base Mount Packages
TS Rails
TS Router Table Support Hardwares
LS Positioner Upgrades
|
|
|
|
TABLE SAW ACCESSORIES:
|
|
|
|
|
|
|
INCRA
MITER GAUGES
The extreme accuracy that made INCRA famous is now available
in an extraordinary NEW family of incremental Miter Gauges.
If you've decided it's time to replace the factory gauge
that came with your table saw, band saw, router table,
disk sander, belt sander, or any other tool with a miter
slot, INCRA now offers eight different models to choose
from with just the right features at just the right price.
INCRA
Miter V27
INCRA
Miter V120
INCRA
Miter 1000
INCRA
Miter 1000SE
INCRA
Miter 1000HD
INCRA
Miter 3000SE
INCRA
Miter 5000
INCRA
Miter Express
INCRA
Miter Gauge Combo Pack
|
|
|
INCRA I-BOX JIG FOR BOX JOINTS
This is the most advanced box joint jig ever produced! Works at both table saws and router tables, features micro-adjustable joint tightness, and allows pin widths from 1/8" - 3/4". Fast setup for basic joints, plus advanced capability for unique decorative joints, too. Hand screw clamp not included. Made in USA.
|
|
|
RIDGE CARBIDE BLADES
Ridge Carbide TS2000 10x40T Saw Blade
Ridge Carbide 8” Stack Dado
Ridge Carbide Triple Play Box Joint Blade Set
Ridge Carbide TS2000 10" x 60T Saw Blade |
|
|
|
FORREST SAW BLADES
For Table Saw, Radial Arm Saws and Chop / Miter Saws. Forrest Dado King Sets for Table and Radial Arm Saw.
Forrest Woodworker-II 40T 10" x 1/8" Kerf
Forrest Woodworker-II 40T 10" x 3/32" Kerf
Forrest 8" Dado King Stacking Dado Set w/ Case
Forrest 8" 2-pc Box Joint Blade Set
|
|
|
|
SETUP TOOLS
A-Line-It System Kit
Woodpeckers Saw Gauge
Wixey WR365 Digital Angle Gauge with Level
Wixey Mini Digital Height Gauge
Wixey 3" Digital Protractor
Wixey 8" Digital Protractor
Wixey Digital Height Gauge w/ Fractions
Wixey Digital Calipers w/ Fractions
iGaging Digital Dial Indicator
iGaging OriginCal 6" IP54 Digital Caliper
iGaging E-Z View 6" Digital Caliper with Fractions
iGaging Angle Cube Level/Bevel Gauge
iGaging SnapDepth Digital Indicator
iGaging 0-1" Digital Thickness Gauge
iGaging 22pc Indicator Tip Set
iGaging Magnetic Base w/ Digital Indicator
|
|
|
|
JESSEM PARALIGN FEATHER BOARD (DOUBLE PACK)
The Paralign Double Pack includes hardware for stacking both feather boards together, perfect for controlling taller panels on a router table or when resawing at the band saw.
|
|
|
|
GRR-RIPPER
SAFETY SYSTEM
Improve your results and increase your safety with these innovative, American-made products! The MicroJig
GRR-Ripper System is by far the most versatile lumber control device on the market, with adjustments and available
accessories to help you get better cuts at almost every machine in your shop.
MicroJig GRR-Ripper System Advanced
MicroJig GRR-Ripper System - Basic
MicroJig GRR-Ripper Handle Bridge
MicroJig Deflector/Connector for the GRR-Ripper
|
|
|
|
SPLITTERS
MicroJig Table Saw Splitter - For 1/8" Saw Blade
MicroJig Table Saw Splitter - For Thin Kerf Saw Blade
MicroJig SteelPro Splitter - For 1/8" Saw Blade
MicroJig SteelPro Splitter - For Thin Kerf Saw Blade
|
|
|
|
ROUTER TABLE FENCES:
|
|
|
|
|
|
INCRA ROUTER FENCE & TABLE COMBOS
Start here for great values on complete, stand-alone router
table and fence systems.
Router
Fence & Table Combo #1
17"
Range LS Standard System with
24" x 36" Router Table &
Stand
Router
Fence & Table Combo #2
17"
Range LS Standard System
with
27" x 43" Router Table &
Stand
Router
Fence & Table Combo #3
17"
Range LS Super System
with
27" x 43" Router Table &
Stand
Router
Fence & Table Combo #3 (The Works)
The new Router Table Combo 3 "The Works" is an extension of RT Combo 3, adding the most popular accessories at a substantial discount: Exceptional dust collection from the INCRA CleanSweep System, wheels, a remote switch, plus the accuracy & convenience of an INCRA Router Lift.
Router
Fence & Table Combo #4
Stand
Along 37" Wonder Fence
with 24" x 32" Center Mount Router
Table & Stand.
|
|
|
|
INCRA LS STANDARD SYSTEM
The world's most versatile and accurate movable fence
for your router table, drill press, or band saw. Designed
to meet the needs of the most serious woodworker yet easy
enough for even a beginner to use.
LS 17" Range Standard
System
LS 25" Range Standard
System
|
|
|
|
INCRA LS SUPER SYSTEM
This system is the ultimate in precision fence systems
for serious joinery and woodworking fans.
Available
in 2 sizes.
LS 17" Range Super
System
LS 25" Range Super
System
|
|
|
|
INCRA I-BOX JIG FOR BOX JOINTS
This is the most advanced box joint jig ever produced! Works at both table saws and router tables, features micro-adjustable joint tightness, and allows pin widths from 1/8" - 3/4". Fast setup for basic joints, plus advanced capability for unique decorative joints, too. Hand screw clamp not included. Made in USA.
Click here to
see all I-Box Combos & Accessories
|
|
|
|
ORIGINAL INCRA JIG FENCE SYSTEMS
|
|
|
|
INCRA WONDER FENCE
The Wonder Fence ~ by INCRA is a heavy-duty, one-fence solution designed for all your routing operations, shaping, edge-forming and precision joinery.
|
|
|
INCRA ROUTER SYSTEM ACCESSORIES
For easy upgrades and all available INCRA Router Table
System Accessories and more.
INCRA Mast-R-Lift II
INCRA QuickLift Router Lift
INCRA PRL-V2 Adaptor Pads
Milwaukee 5625-20 Heavy Duty 3.5hp Router
Milwaukee 1/4" Router Collet Assembly
Free-Standing Router Tables
MagnaLock
Ring Sets
MagnaLock
Router Plates
Router
Table Stands
Router
Stand Wheel Kits
INCRA
Shelf Supports
JessEm Pow-R-Tek Remote Safe Router Switch
LS
Positioner Upgrades
Wonder Fence
Upgrades
Router
Bit Sets
INCRA
HingeCrafter
Wixey
Digital Height Gauge w/ Fractions
Wixey
Digital Calipers w/ Fractions
Wixey
Remote Digital Readout w/ Fractions
|
|
|
|
ROUTER TABLES & STANDS:
|
|
|
|
|
|
|
INCRA FREE STANDING ROUTER TABLE TOPS
Available
in 3 sizes for a free standing application.
24"
x 32"
Center Mount Router Table
24"
x 36"
Offset Router Table
27"
x 43"
Offset Router Table
|
|
|
|
INCRA TABLE SAW ROUTER TABLE TOPS
INCRA's
NEW lineup of heavy-duty router table tops also includes
4 models designed
specifically for the table saw.
28"
x 21"
TS Router Table - Left Side
of Blade
28"
x 32"
TS Router Table - Right Side
of Blade
32"
x 21"
TS Router Table - Left Side
of Blade
32"
x 32"
TS Router Table - Right Side
of Blade
|
|
|
|
INCRA ROUTER TABLE STANDS
INCRA's
new Router Table Stands provide a rock solid base to build on.
Available
in 2 sizes.
Router
Table Stand - for UP to
36" Wide Table
Router
Table Stand - for UP to
43" Wide Table
|
|
|
INCRA CLEANSWEEP DUST COLLECTION
Keeps your shop cleaner by collecting sawdust at the source using your 4" dust collector! Easy-assembling precision molded ABS & steel cabinet attaches to the underside of laminated MDF or phenolic router tables from INCRA, Woodpeckers, and many others.
INCRA CleanSweep Dust Collection Combo
INCRA CleanSweep Dust Collection Cabinet
INCRA 6-pc CleanSweep MagnaLOCK Ring Set
Individual INCRA CleanSweep MagnaLOCK Rings
INCRA CleanSweep MagnaLOCK Porter-Cable Guide Bushing Ring
INCRA CleanSweep Router Table Adapter
|
|
|
|
INCRA ROUTER STAND WHEEL KITS
|
|
|
|
INCRA SHELF SUPPORTS
These
are extra sets of the short stringers for the
Router
Table Stand 36
and
Router Table Stand
43.
|
|
|
|
INCRA MAST-R-IFT II & MAST-R-LIFT II CONVERSIONS
New and improved! Allows precise height adjustments and change router bits above the table. Direct-drive, super low friction, and it's compatible with wide variety of fixed base routers without the need for adapters. Fits every INCRA router table.
|
|
|
INCRA QUICKLIFT ROUTER LIFT
The INCRA/Woodpeckers collaboration allows fast, precise height adjustments and changing router bits above the table. The included (5) MagnaLock rings can be swapped quickly and without tools to handle different router bits, and the CleanSweep dust collection rings can be added as options.
9-1/4" x 11-3/4" x 3/8" plate size fits all INCRA Router Tables and some other brands. 3 versions available. |
|
|
JESSEM POW-R-TEK REMOTE SAFE ROUTER SWITCH
JessEm’s new heavy duty 15 Amp switch allows switching the router without reaching under the table. The steel outer housing is carried by a stainless-steel bracket that attaches easily to INCRA router table stands, TS rail systems, or other router tables with 1/4"-20 hardware.
|
|
|
|
ROUTERS & ACCESSORIES
Complete your INCRA System with a new router.
|
|
|
|
INCRA MAGNALOCK ROUTER TABLE PLATES
INCRA's 3/8" solid aluminum mounting plates are the new
standard for achieving perfect cutting results at your router table.
|
|
|
|
INCRA MAGNALOCK RING SET - 8 RINGS
Simply
drop any plate into the keyed recess and the MagnaLock
plate snaps smartly
into place held securely in place by 4
high-energy rare earth magnets.
Buy
Individual INCRA MagnaLOCK Ring
INCRA 6-pc CleanSweep MagnaLOCK Ring Set
Individual INCRA CleanSweep MagnaLOCK Rings
INCRA CleanSweep MagnaLOCK Porter-Cable Guide Bushing Ring
INCRA MagnaLOCK Solid Insert
|
|
|
|
PORTER-CABLE 9-PIECE GUIDE BUSHING SET
Set includes 7 steel guide bushings in popular sizes plus two lock rings, all in a fitted case. Compatible with all brands of router bases or router plate rings that have a recessed 1-3/16" center hole.
Made in USA, 3yr warranty.
|
|
|
|
ROUTING ACCESSORIES:
|
|
|
|
|
|
|
ROUTER BIT SETS
Whiteside bits are as good as you'll find, earning #1 ratings in both of the past
two Fine Woodworking Magazine router bit comparison tests.
8-Piece
INCRA HingeCrafter
Router Bit Set
6-Piece
INCRA Joinery
Router Bit Set
6-Piece Metric INCRA Joinery Router Bit Set
8-Piece Metric INCRA HingeCrafter Router Bit Set
Whiteside Ten Essential Router Bits
Whiteside Basic Router Bit Set
Whiteside Roundover & Beading Bit Set
Whiteside Multi-Beading Roundover Bit Set
Whiteside K-41 Pattern Routing Bit
|
|
|
|
INCRA I-BOX JIG FOR BOX JOINTS
This is the most advanced box joint jig ever produced! Works at both table saws and router tables, features micro-adjustable joint tightness, and allows pin widths from 1/8" - 3/4". Fast setup for basic joints, plus advanced capability for unique decorative joints, too. Hand screw clamp not included. Made in USA.
Click here to
see all I-Box Combos & Accessories
|
|
|
|
INCRA LS POSITIONER UPGRADES
The
LS is the beefiest positioner we've ever produced, with
rock-solid capacities
of 17", 25", or 32".
INCRA
LS 17" Range Positioner ONLY
INCRA
LS 25" Range Positioner ONLY
INCRA
LS 32" Range Positioner ONLY
|
|
|
|
ROUTERS & ACCESSORIES
Complete your INCRA System with a new router.
|
|
|
|
PORTER-CABLE 9-PIECE GUIDE BUSHING SET
Set includes 7 steel guide bushings in popular sizes plus two lock rings, all in a fitted case. Compatible with all brands of router bases or router plate rings that have a recessed 1-3/16" center hole.
Made in USA, 3yr warranty.
|
|
|
|
INCRA HINGECRAFTER
The INCRA HingeCrafter serves as a drilling guide for solid wood hinges in 3/8" (9.52mm), 1/2" (12.70mm), 5/8" (15.88mm) & 3/4" (19.05mm) barrel sizes and up to 10" long. Just combine your 1/32"- or metric-based INCRA Positioner or I-Box with the HingeCrafter drill guide and the results will be beautiful wooden hinges ready to glue right into your project. Made in USA.
|
|
|
|
INCRA GAUGE
The INCRA Gauge is Designed for Multiple Marking Needs. Works as a precision marking gauge, a freestanding depth-of-cut gauge, a fence alignment gauge and a center finder.
|
|
|
|
INCRA PUSHBLOCK & HOLD DOWNS
Make your woodworking safer with our broad selection of push blocks and hold downs for every application.
|
|
|
|
IGAGING MAGNETIC LED WORK LIGHTS
Improve your accuracy by getting a better view with this exclusive work light kit. Includes iGaging flexible-arm magnetic base, detachable LED flashlight, and a mounting plate with hardware.
|
|
|
|
JESSEM PARALIGN FEATHER BOARD (DOUBLE PACK)
The Paralign Double Pack includes hardware for stacking both feather boards together, perfect for controlling taller panels on a router table or when resawing at the band saw.
|
|
|
|
GRR-RIPPER SAFETY SYSTEM
MicroJig GRR-Ripper System - Advanced
MicroJig GRR-Ripper System - Basic
MicroJig GRR-Ripper Handle Bridge
MicroJig Deflector/Connector for the GRR-Ripper
MicroJig 1/8" Leg for GRR-Ripper System
|
|
|
|
WOODPECKER COPING SLED
This is simply the best coping sled on the market, greatly improving your control when routing end grain. Great quality construction, nice details, versatile design.
|
|
|
|
INCRA ROUTER TABLE PLATE TEMPLATE
This 3/4"-thick MDF template is machined on computerized
equipment to produce a perfect fitting opening for INCRA or Woodpeckers router lifts and router mounting plates.
|
|
|
|
SETUP TOOLS
Wixey
Digital Height Gauge w/ Fractions
Wixey
Digital Calipers w/ Fractions
Wixey
Remote Digital Readout w/ Fractions
iGaging
Digital Dial Indicator
iGaging
Angle Cube Level/Bevel Gauge
iGaging
SnapDepth Digital Indicator
iGaging
0-1" Digital Thickness Gauge
iGaging
22pc Indicator Tip Set
iGaging
Magnetic Base w/ Digital Indicator
|
|
|
|
PARTS, COMPONENTS & ACCESSORIES:
|
|
|
|
|
|
|
HARD TO FIND INCRA STUFF
Whether you're replacing crash-damaged parts or want additional INCRA components for a custom installation, this portion of Incremental Tools provides direct access to the parts, accessories, and sub-assemblies that are most often asked for.
|
|
|
|
INCRA-LOGO BASEBALL CAPS
Stand out from the crowd with an embroidered INCRA hat. 100% Cotton, comfy Velcro adjustment strap, low profile design!
|
|
|
|
BOOKS & TEMPLATES:
|
|
|
|
|
|
|
Teach you how to make Box Joints, Half Blind and Through Dovetails, and INCRA's trademark Double and Double-Double Joints. Easy to follow instructions will show you step-by-step.
INCRA
Projects & Techniques Book - Downloadable Version
INCRA
Projects & Techniques Book
INCRA
Master Reference Guide & Template Library
|
|
|
|
PRECISION RULES:
|
|
|
|
|
|
|
INCRA PRECISION MARKETING RULES
The precision steel rule select the proper slot or hole, insert a .5mm mechanical pencil and mark the measurement with dead-on accuracy.
INCRA Precision Marking Rule in 6"
INCRA Precision Marking Rule in 12"
INCRA Precision Marking Rule in 18"
INCRA Precision Marking Rule - Metric 150mm
INCRA Precision Marking Rule - Metric 300mm
INCRA Precision Marking Rule - 10" Decimal/mm
INCRA Precision Pocket Rule - 3" x 2"
|
|
|
|
INCRA PRECISION BEND RULES
INCRA Bend Rules make dual-surface layouts a snap using the
corner slots.
INCRA Precision Bend Rule in 6"
INCRA Precision Bend Rule in 12"
INCRA Precision Bend Rule in 18"
INCRA Precision Bend Rule - Metric 150mm
INCRA Precision Bend Rule - Metric 300mm
|
|
|
|
INCRA PRECISION T-RULES
INCRA T-Rules make it very easy to draw exact lines in either direction.
INCRA Precision T-Rule in 6"
INCRA Precision T-Rule in 12"
INCRA Precision T-Rule in 18"
INCRA Precision Tiny T-Rule - 3"
INCRA Precision Tiny T-Rule - 75mm
INCRA Precision T-Rule - Metric 150mm
INCRA Precision T-Rule - Metric 300mm
INCRA Pro T-Rule - in 6"
INCRA Pro T-Rule - in 12"
|
|
|
|
INCRA PRECISION SPECIALTY RULES
INCRA T-Rules make it very easy to draw exact lines in either direction.
INCRA Precision Specialty Rule - 6" Protractor
INCRA Precision Specialty Rule - 12" Centering
INCRA Precision Specialty Rule - 6" x 3" Precision X-Y Marker
INCRA Precision Specialty Rule - 160mm Protractor
INCRA Precision Specialty Rule - 300mm Centering Rule
|
|
|
|
INCRA RULES MASTER SET
The Master Sets offer one-stop shopping, giving you the opportunity
to own all of the most popular INCRA Rule sizes and styles with one click.
INCRA Rules Master Set (Imperial)
INCRA Rules Master Set PLUS (Imperial)
INCRA Rules Master Set (Metric)
|
|
|
|
INCRA PRECISION RULE SETS
INCRA Rules are sold individually or in complete 6", 12", and 18" sets. Each set includes the Precision Marking Rule, Precision T-Rule, and Precision Bend Rule.
INCRA Precision Rule Set in 6"
INCRA Precision Rule Set in 12"
INCRA Precision Rule Set in 18"
INCRA Precision Rule Set in 150mm
INCRA Precision Rule Set in 300mm
INCRA Pro Rule Set - in 6"
INCRA Pro Rule Set - in 12"
|
|
|
|
INCRA CUSTOM RULES
Keep your company logo in front of your customers at the very time they are involved in woodworking. Measuring, marking and layout are primary activities in the shop and your logo will be closely seen more often than any other during typical projects.
|
|
|
|
WOODPECKERS PRECISION RULES
Take a look at the new added precision rules from Woodpeckers.
Woodpeckers 24" Precision T-Square
Woodpeckers 32" Precision T-Square
Woodpeckers 24" Precision Woodworking Rule
Woodpeckers 36" Precision Woodworking Rule
Woodpeckers 24" Straight Edge Rule
|
|
|
|
SQUARES, ANGLES & STRAIGHT EDGES:
|
|
|
|
|
|
|
INCRA GUARANTEED SQUARES & ANGLES
INCRA's new line of Precision Squares and 45s are the most accurate you will find anywhere.
INCRA Guaranteed Squares
INCRA Guaranteed Angles
|
|
|
|
SQUARES, ANGLES & STRAIGHT EDGES
Woodpeckers 24" Straight Edge Rule
Woodpeckers 24" Precision T-Square
Woodpeckers 32" Precision T-Square
iGaging Premium Marking Knife
iGaging 10pc Angle Block Set
|
|
|
|
SETUP TOOLS:
|
|
|
|
|
|
INCRA GAUGE
The INCRA Gauge is Designed for Multiple Marking Needs. Works as a precision marking gauge, a freestanding depth-of-cut gauge, a fence alignment gauge and a center finder.
|
|
|
|
INCRA 0.5MM MECHANICAL PENCIL
0.5mm Mechanical Pencil is made for all INCRA Precision Rules & Layouts. The pencil marks the work perfectly without worry of parallax or angle slip.
|
|
|
|
INCRA 0.5MM MECHANICAL PENCIL 10-PACK
INCRA 0.5mm pencils work with INCRA Rules to perfectly mark your work without parallax or angle slip, and they're ideal for all your layout tools. Preloaded with several extra leads and easily refillable after that.
|
|
|
JESSEM STAINLESS STEEL TOOL SETTING GAUGES
Interlocking teeth machined into JessEm’s Setting Gauge every 1/16” or 1mm guarantee that your height adjustments and fence setups will be dead on and completely repeatable. Machined from stainless steel, brass, and aluminum, this is one of those hefty “lifetime” tools that you’ll love.
JessEm Stainless Steel Tool Setting Gauges
(individual)
JessEm Tool Setting Gauge 2-pc Set (Imperial)
JessEm Tool Setting Gauge 2-pc Set (Metric)
|
|
|
|
JESSEM WOOD SABRE MARKING GAUGE
Unique features, good ergonomics, and exceptional accuracy make the new JessEm Wood Sabre the new standard for marking gauges. 6" range, micro adjustable to 1/256", aluminum and stainless steel construction.
Made in Canada.
|
|
|
MICROJIG FITFINDER 1/2 MACHINE SETUP GAUGE
The FitFinder 1/2 Gauge automatically finds half the thickness of your workpiece using simple geometry, no math or measuring required! Simplifies setting up resawing jobs, cutting half lap joints and more.
|
|
|
|
MICROJIG DADO STOP ACCESSORY FOR MATCHFIT CLAMPS
MicroJig's new Dado Stop will eliminate endless fine tuning when setting up for dados, half-lap joints, and inlay work. Automatically adjusts for any cutter widths up to 13/16".
For use with MatchFit Dovetail Clamps, sold separately. Made in USA.
|
|
|
|
MICROJIG MATCHFIT DADO STOP PRO
MicroJig's Dado Stop Pro eliminates endless fine tuning when setting up for dados, lap joints, and inlay work. Automatically adjusts for both the blade kerf and board thickness up to 13/16". Includes (1) each MatchFit Dado Stop, MatchFit Dovetail Clamp, & MatchFit Setup Gauge.
|
|
|
|
MICROJIG DADO STOP STEUP GAUGE
When you need accurate dados, the new Setup Gauge accessory for MicroJig's MatchFit Dado Stop makes that tool's setup even faster. The gauge records you blade kerf with a one-time cut, and then transfers that to your Dado Stop each time you set it to match a different material thickness. Order a couple to record your different kerf blades!
|
|
|
A-LINE-IT SYSTEM KIT
The A-Line-It was selected as the "Top Value" in the WOOD Magazine article that compared woodworking machine alignment tools. FREE DVD covers all of the basics of getting your equipment fine-tuned.
|
|
|
|
WOODPECKERS SAW GAUGE
The Saw Gauge uses a dial indicator with a 1" stroke and 1/1000" dial graduations, perfect for aligning the blade and rip fence to the saw's miter slot, checking saw blade runout, and even diagnosing internal problems like arbor and arbor flange runout.
|
|
|
|
WIXEY WR365 DIGITAL ANGLE GAUGE WITH LEVEL
This updated angle gauge is a big time saver, producing machine setups accurate to 0.1 degrees. Super strong magnets, the flip-up digital display, and a permanently calibrated level feature make it the best of its type. Imported.
|
|
|
|
WIXEY MINI DIGITAL HEIGHT GAUGE
The new Mini Digital Height Gauge's unique horseshoe-shaped body has magnetic feet and allows fast, accurate setups of cutter heights or fence setups in inches or millimeters. Includes snap-in depth probe for measuring holes or grooves. Imported.
|
|
|
|
WIXEY 3" DIGITAL PROTRACTOR
This 3" Digital Protractor is the more compact of the two
Wixey models and is perfect for tight spaces such as setting up
band saws.
|
|
|
|
WIXEY 8" DIGITAL PROTRACTOR
This 8" Digital Protractor is the larger of the two Wixey models
and is a perfect choice for layout work with lumber or setting up
larger machines.
|
|
|
|
WIXEY DIGITAL HEIGHT GAUGE WITH FRACTIONS
Designed specifically for woodworking, the Wixey Height Gauge allows precision cutter height settings in decimal inch, millimeters, and even fractions simultaneously using Wixey's exclusive Precise Fraction Technology.
|
|
|
|
WIXEY DIGITAL CALIPERS WITH FRACTIONS
Designed specifically for woodworking, Wixey's Digital Calipers accurately display decimal inches and fractions simultaneously using exclusive Precise Fraction Technology. Metric capability, too.
|
|
|
|
WIXEY REMOTE DIGITAL READOUT WITH FRACTIONS
Wixey's exclusive Precise Fraction Technology is now available in
a universal remote readout that adds super-precise height setups to router lifts, Shapers, etc. Displays decimal inch and fractions simultaneously. Metric capability, too!
|
|
|
|
IGAGING IP54 ANGLE GAUGE
It's rechargeable! This 3rd generation Angle Cube is loaded with features: IP54 dust & moisture protection rating, displays level & tilt to 0.05 degrees, magnetic case, optional data output to computer, and more!
|
|
|
|
IGAGING DIGITAL DIAL INDICATOR
Value priced, super-smooth Digital replacement for standard analog dial indicators. Reads in decimal inch, fractions, or millimeters. Mounting lug for the 1/4" or 6mm hardware found on most alignment tools and indicator bases. Imported.
|
|
|
|
IGAGING E-Z VIEW 6" DIGITAL CALIPER WITH FRACTIONS
These stainless steel, 6"-range digital calipers feature a HUGE display for easy reading. Displays decimal inch, fractional inch, and millimeters at the press of a button.
|
|
|
|
IGAGING ANGLE CUBE LEVEL/BEVEL GAUGE
Measures relative angles for setting up machines or it works like a pocket level with 0.05 degree resolution.
|
|
|
|
IGAGING SNAP-DEPTH DIGITAL INDICATOR
This handy gauge quickly measures groove or rabbet depths and works with many dial indicator bases. Reads in decimal inch, fractional inch, or millimeters.
|
|
|
|
IGAGING 0-1" DIGITAL THICKNESS GAUGE
Super handy, compact gauge quickly shows the thickness of your material in decimal inch, fractions, or millimeters. 0" to 1-1/6" range.
|
|
|
|
IGAGING 22PC INDICATOR TIP SET
22pc set of dial indicator tips in a broad variety of lengths and shapes. Standard threads fit conventional dial and digital indicators.
|
|
|
|
IGAGING MAGNETIC BASE W/ DIGITAL INDICATOR
Universal magnetic base with iGaging Digital Indicator and micro-adjustable arms. Perfect for setting cutter height, making fences setups and general inspection work.
|
|
|
|
MITER GAUGES:
|
|
|
|
|
|
|
INCRA MITER V27
INCRA Miter V27 makes it possible to put an INCRA Miter Gauge
in EVERY standard miter channel in your shop.
|
|
|
|
INCRA MITER V120
An incredible 120 angle stops are laser cut into the steel protractor, with a stop available for every whole degree and two special stops at 22.5 degrees for cutting eight-sided frames and mouldings.
|
|
|
|
INCRA MITER 1000
If you are looking for a great combination of basic affordability combined with unbeaten accuracy, the INCRA Miter 1000 is a
terrific choice.
|
|
|
|
INCRA MITER 1000HD
The NEW Miter 1000HD is a highly accurate, compact solution for general woodworking featuring an 18"-31" telescoping fence, INCRA Flip Shop Stop, 180 positive angle stops , and a1/10? vernier cursor. The adjustable miter bar fits 3/8" deep miter slots measuring between 0.740" and 0.765" wide.
|
|
|
|
INCRA MITER 1000SE
The Miter 1000 Special Edition (Miter 1000SE) builds on the excellent foundation provided by the Miter 1000.
|
|
|
|
INCRA MITER 3000SE
The Miter 3000 Special Edition (Miter 3000SE) builds on the outstanding platform provided by the Miter 3000.
|
|
|
|
INCRA 5000
The Miter 5000 blends the incremental angle control features of the Miter 3000SE with a very special 3-panel Sled for the ultimate miter cutting workstation for the table saw.
|
|
|
|
INCRA MITER GAUGE COMBO
Get the max savings with INCRA Miter Gauge Combo Packs. These packages include the INCRA Miter Express Sled plus either the INCRA Miter 1000SE, 1000HD, or 3000SE Miter Gauge.
|
|
|
|
INCRA MITER EXPRESS
INCRA's new Miter Express offers any miter gauge owner the safest and most accurate cross-cutting and mitering platform available.
|
|
|
|
MITER GAUGE ACCESSORIES:
|
|
|
|
|
|
|
INCREMENTAL FLIP SHOP STOP POSITIONER
For IncraLOCK Flip Fences ONLY. Designed for the IncraLOCK Flip Fence or the extending IncraLOCK Flip Fence SE, this stop gives you the most options and best performance of any stop on the market.
|
|
|
|
INCRALOCK INCREMENTAL FLIP SHOP STOP CUT-OFF FENCES
The IncraLOCK Flip Fence and the extending IncraLOCK Flip Fence SE are both designed to give you outstanding fence performance
and rigidity.
IncraLOCK Incremental Flip Shop Stop Cut-off Fence - 18"
IncraLOCK Incremental Flip Shop Stop Cut-off Fence - 36"
IncraLOCK Incremental Flip Shop Stop Cut-off Fence - 52"
|
|
|
|
INCRA TELESCOPING FLIP FENCE 18" TO 31"
The INCRA Flip Fence is designed to give you outstanding fence Performance and rigidity. This 18" to 31" Telescoping Fence is forupgrade from Miter 1000 to Miter 1000SE.
|
|
|
|
INCRA TELESCOPING FLIP FENCE 27" TO 49"
The INCRA Flip Fence is designed to give you outstanding fence performance and rigidity. This 27" to 49" Telescoping Fence is forupgrade from Miter 3000 to Miter 3000SE.
|
|
|
|
INCRA TELESCOPING FLIP FENCE 36" TO 64"
The ideal application for this fence is to get maximum cut off range
for an INCRA miter gauge that's being carried by the Miter Express sled.
|
|
|
|
MITER EXPRESS REPLACEMENT PANEL
Use this panel as a replacement for the "drop panel" that's cut during the initial setup of the Miter Express. The drop panel can easily be replaced when installing the Express on a different saw or switching the sled to the opposite side of the blade!
|
|
|
|
MITER 5000 REPLACEMENT PANEL
Use this panel as a replacement for the "drop panel" that's cut during the initial setup of the Miter 5000. The drop panel can easily be replaced when installing the Miter 5000 on a different saw or switching the sled to the opposite side of the blade.
|
|
|
|
METRIC INCREMENTAL RACK PACK - 5PC. SET
Metric Rack Packs and scales can convert any incremental rack-based INCRA positioning product from imperial to a 1mm metric spacing. Great for earlier INCRA fence positioners, miter gauges, fence stops, and INCRA Track Systems.
|
|
|
|
METRIC INCREMENTAL RACK PACK - 10PC. SET
Metric Rack Packs and scales can convert any incremental rack-based INCRA positioning product from imperial to a 1mm metric spacing. Great for earlier INCRA fence positioners, miter gauges, fence stops, and INCRA Track Systems.
|
|
|
|
JIG & FIXTURE COMPONENTS:
|
|
|
|
|
|
|
INCRA BUILD-IT SYSTEM
INCRA's new Miter Express offers any miter gauge owner the safest and most accurate cross-cutting and mitering platform available.
The INCRA Build-It Modular Jig & Fixture Platform System is a revolutionary time saver for constructing a huge variety of common
and special purpose jigs such as coping sleds, tenoning jigs, table saw cross cutting sleds, and many more.
The adjustable miter slot runners screw to predrilled universal panels to form an accurate foundation for the jig, panels can be quickly
linked together, and the various knobs, T-Tracks, brackets, and connectors make short work of attaching the jig's remaining components.
INCRA Build-It System Starter Kit
INCRA Build-It Panel - Large (11.75" x 15.50")
INCRA Build-It Panel - Small (7.75" x 15.50")
INCRA Build-It T-Slot Connector - 18"
INCRA Build-It T-Slot Connector - 24"
INCRA Miter Slider SE- 18"
INCRA Miter Slider SE - 25.5"
INCRA Miter Slider - 18"
INCRA Miter Slider - 24"
INCRA Build-It Brackets
INCRA Build-It Clamp
INCRA Build-It Twist Handle Knobs
INCRA Build-It Ratchet Lever Knobs
|
|
|
|
INCRA TRACK SYSTEMS
The INCRA Track System is designed for maximum versatility in your woodworking shop. Including INCRA Track & INCRA Shop Stop. Available in 3 sizes:
INCRA Track System - 18" Track & Shop Stop
INCRA Track System - 36" Track & Shop Stop
INCRA Track System - 52" Track & Shop Stop
|
|
|
|
INCRA T-TRACKS
INCRA T-Track Regular is a single T-Track, no scale. T-Track Plus is the only T-Track with an included adjustavle scale.
Choose from four lengths. Can be cut to fit your jig exactly.
INCRA T-Track Regular - 18"
INCRA T-Track Regular - 24"
INCRA T-Track Regular - 36"
INCRA T-Track Regular - 48"
INCRA T-Track Plus - 18"
INCRA T-Track Plus - 24"
INCRA T-Track Plus - 36"
INCRA T-Track Plus - 48"
|
|
|
|
INCRA & WOODPECKERS TRACK CLAMPS
Great clamping options for any application! Compatible with INCRA & Woodpeckers T-Tracks and most brands that use 1/4"-20 hardware.
Made in USA.
|
|
|
MICROJIG MATCHFIT DOVETAIL TRACK CLAMP AP
The Anti-Pivot Coil Spring keeps the clamp arm from dropping when unclamping – no need to constantly reset your clamp height during repetitive jobs, and the included X-PAD™ simultaneously applies vertical hold-down and lateral in-line pressure as the clamp tightens, letting you do more clamping with fewer clamps.
|
|
|
|
MICROJIG MATCHFIT DOVETAIL CLAMPS (PAIR)
These unique clamps will save you time and aggravation in too many ways to list! MatchFit clamps slide anywhere along a groove routed with a common 1/2" - 14 degree dovetail bit and leave one surface of your work clear of obstructions. Use these clamps to create customizable clamping tables and for attaching table extensions, sub fences, stop blocks, hold downs, and more to your machinery and work tables. Imported.
|
|
|
|
MICROJIG MATCHFIT DADO STOP PRO
Micro Jig's Dado Stop Pro eliminates endless fine tuning when setting up for dados, lap joints, and inlay work. Automatically adjusts for both the blade kerf and board thickness up to 13/16". Includes (1) each MatchFit Dado Stop, MatchFit Dovetail Clamp, & MatchFit Setup Gauge.
|
|
|
|
MICROJIG DADO STOP STEUP GAUGE
When you need accurate dados, the new Setup Gauge accessory for Micro Jig's MatchFit Dado Stop makes that tool's setup even faster. The gauge records you blade kerf with a one-time cut, and then transfers that to your Dado Stop each time you set it to match a different material thickness. Order a couple to record your different kerf blades!
|
|
|
|
INCRA MITER SLIDER SE
Here's a new product that combines the versatility of the INCRA
Build-It products with the unique performance and feel of the adjustable GlideLOCK miter bar used on INCRA Miter Gauges. The new steel Miter Slider SE are more rigid than any wooden or plastic runners, and they're not susceptible to changes in humidity or temperature.
INCRA Miter Slider SE- 18"
INCRA Miter Slider SE - 25.5"
|
|
|
|
INCRA MITER SLIDER
This long aluminum runner adjusts from the TOP for perfect sliding action in any standard 3/4" x 3/8" miter gauge slot. Won't warp, shrink, or swell like wooden runners.
INCRA Miter Slider - 18"
INCRA Miter Slider - 24"
|
|
|
|
INCRA MITER CHANNEL
Now you can add an INCRA T-Slot Miter Channel to any router table or user-made fixture for use with your miter gauge, feather boards, hold-downs or sliding jigs.
INCRA Miter Channel - 32"
INCRA Miter Channel - 48"
|
|
|
|
INCRA JUMBO RIGHT ANGLE FIXTURE
Metric Rack Packs and scales can convert any incremental rack-based INCRA positioning product from imperial to a 1mm metric spacing. Great for earlier INCRA fence positioners, miter gauges, fence stops, and INCRA Track Systems.
|
|
|
|
INCREMENTAL TOOLS GIFT CERTIFICATE:
|
|
|
|
|
|
|
INCREMENTAL TOOLS GIFT CERTIFICATE
Looking for the perfect gift? Purchase our online Gift Certificates for any occasion.
|
|
|
|
|
|
|
|
|
|
Can't
find what you are looking for?
Please call our toll free number: 1.888.804.6272
Business Hours:
Monday through Friday: 9:00AM ~ 5:00PM
(ET)
or email your questions to:[email protected]
|
|
|
|
|
|
