Take the joinery prowess of the LS25 Standard System and add the day-to-day versatility of the Wonder Fence to the front, and you have an INCRA Super System, the true Decathlon Champion of router fences.

Let's face it, specialized jigs for specific operations spend a lot of time on the shelf. Because the router table is the second most-used tool in most shops and an INCRA Super System is so versatile, it's an investment that pays you back virtually every time you walk into the shop.

This is a fence system that's easily handles EVERY fence-guided operation that can be done on a router table:
Producing raised panel doors with full zero-clearance, edge shaping, edge jointing rough lumber, traditional joinery like rabbets and dados, and of course producing the dizzying array of box joints and dovetails that INCRA is famous for.

The Lead Screw (LS) Technology The LS positioner's accuracy is +/- .002" (0.05mm) on the lead screw's 1/32" or 1mm primary increments across its entire range, so it's essentially perfect even without the built-in micro adjust. The large micro-adjust knob turns the lead screw against the mating threads, allowing the fence to be shifted in .001" (0.025mm resolution) to tweak the width of a groove or zero the fence against a router bit.

This LS Fence System also includes:

	The Master Reference Guide The Master Reference Guide provides straightforward instructions and 51 joinery templates (25 templates in the metric version) to slide into the positioner to provide a visual reference for each joint pattern. Those templates can produce a mind-boggling variety of joints - 11 box joint patterns and 29 dovetail patterns are included (or 9 metric box joints and 16 metric dovetails), and each one of the dovetail patterns can be cut half blind, through, sliding, or corner post. The number of variations on the standard patterns runs into the billions if you have enough time to experiment.
	INCRA Jumbo Right Angle Fixture & INCRA Shop Stop Our largest Right Angle Fixture is included to keep workpieces square to the fence and square to the table for joinery operations.
	Instead of the basic stop block of typical router fences, the included INCRA Shop Stop is based on our patented incremental positioning racks to give you unparalleled accuracy and repeatability when limiting a board's travel across the router bit or setting the endpoints of stopped grooves for drawer and box bottoms.

	INCRA CleanSweep Dust Collection Improved dust collection for all of your router table work! Use the power of your shop's dust collection system to grab sawdust where it's produced on your router table! The CleanSweep cabinet attaches to the underside of laminated MDF or phenolic router tables from INCRA, Woodpeckers, JessEm, and many others. This must-have accessory is one of the easiest ways to improve the quality of your router table time!
	INCRA 27" x 43" Offset Router Table INCRA Router Fence Systems can be installed on any router table, but there's no question that using a top-quality table will improve your results. This 27" x 43" offset-style router table is the largest we make and our most popular model. Horizontal-grade high pressure laminate is installed top and bottom with 50 tons of pressure, the router opening is computer machined for snug fit for the router plate, and there are ten large leveling bolts embedded in the router plate opening. Its generous work surface is predrilled for the LS fence systems. Comes with a factory installed aluminum miter channel, and all INCRA Router Tables include an aluminum INCRA MagnaLOCK Router Mounting Plate that is pre-drilled to fit most popular routers. Upgrade to an INCRA Router Lift for the ultimate in convenience! Made in USA.
	INCRA Projects & Techniques Book The definitive work on using INCRA Tools. This 148 page book contains detailed plans with over 400 illustrations and photos to build 14 of Perry McDaniel's intriguing original projects. Printed in U.S.A.